본문바로가기

BusinessSTEEL SERVICE CENTER

Dangjin Factory 1
Aerial photograph

Dangjin Factory 1
outside

Dangjin Factory 1
Internal

Dangjin Factory 1
Internal2

location

Facilities

Division Unit Number Processing Range (mm) Capacity
(tons/year)
Thickness Width Length Unit Weight Ts
SLITTER 1 0.3~3.2 600~1,650 - MAX 25 Ton 0.3~1.2 : 120kg/㎟
1.3~1.6 : 100kg/㎟
1.7~3.2 : 80kg/㎟ 		150,000
SLITTER 1 0.6~9.0 750~1,650 - MAX 30 Ton MAX50kg/㎟ 150,000
SHEAR 1 1.2~6.35 800~1,650 800~9,000 MAX 30 Ton 1.2~4.5T : 80kg/㎟
4.6~6.35T : 60kg/㎟ 		200,000

  • UNCOILER

    Process of unwinding incoming coil by giving certain tension

  • 3 - ROLL

    Process of enabling smooth feeding by correcting top part of the coil

  • SLITTER

    Process of slitting materials with certain width

    video

  • SCRAP BALLER

    Process of taking the role of winding scrap way off pit after slitting in the slitter

    video

  • LOOP TABLE

    Process for absorbing the difference between the slitter process speed and the recoiler speed

  • BELT BRIDLE

    Process of controlling the flow direction of the strip to wrap the slitted skelp on the recoiler

    video

  • RECOILER

    Process of winding Skelp after slitting

    video

  • 2 - ARM

    Process of taking out the coil after recoiling has been completed

    video

  • UNCOILER

    Process of unwinding incoming coil by giving certain tension

    video

  • 3 - ROLL

    Process of enabling smooth feeding by correcting top part of the coil

  • SLITTER

    Process of slitting materials with certain width

    video

  • SCRAP WINDER

    Process of rewinding the scrap which is trimmed at its edge in sync with the line speed in the slitter process

    video

  • LOOP TABLE

    Process for absorbing the difference between the slitter process speed and the recoiler speed.

  • TENSION PAD

    Process of giving tension to recoiler in slitting

    video

  • BRIDLE ROLL

    Process of controlling the flow direction of the strip to wrap the slitted skelp on the recoiler

  • RECOILER

    Process of winding Skelp after slitting

    video

  • 2 - ARM

    Process of taking out the coil after recoiling has been completed

  • UNCOILER

    Process of unwinding incoming coil by giving certain tension

    video

  • ROUGH LEVELLER

    Process for correcting the shape of the coil, which has an extremely poor shape

    video

  • SIDE TRIMMER

    Process of continuously trimming the coil edge area by rotating the upper and lower pairs of disk knifes

  • SCRAP WINDER

    Process of rewinding the scrap which is trimmed at its edge in sync with the line speed in the slitter process

  • MULTI LEVELLER

    Process of continuously correcting the flatness of the product through manipulation of work roll and back up roll

    video

  • MEASURE UNIT

    Process of measuring the length and line speed of the coil with an electrical signal and giving feedback of the value to the DDS control panel

  • ROTARY SHEAR

    Process of cutting to desired length of incoming coil

    video

  • INSPECTION EQUIPMENT

    Process of transferring the cut sheet from the rotary shear to the inspection table for inspection

  • CONVEYOR

    Process of transferring the cut sheet from the rotary shear to the piler

    video

  • PILER

    Process of arranging and loading the sheets cut by rotary shear

    video